Corlar® 2.1 PR-P™ is a high solids, two component, VOC conforming (2.1 lbs./gal.) Low HAPS productive primer based on DuPont modified polyamide epoxy technology. The resulting highly durable, very fast dry primer, delivers excellent corrosion and chemical resistance.

SUGGESTED USES:
As a highly durable primer on properly prepared carbon steel, galvanized steel, stainless steel and aluminum where:

�� recoating in 30 minutes is required for maximum productivity
�� no induction time and long pot life will improve productivity
�� a smooth, sandable primer at 3 mils DFT for maximum appearance when topcoated is required
�� a high build primer up to 5 mils DFT over abrasive blasted or power tool cleaned carbon steel substrates is needed
�� Application by brush and roller, in addition to spraying, may be necessary.
�� Spray application with minimal dry spray is desired.
�� Application at temperatures as low as 35*F.

NOT RECOMMENDED FOR:
�� Immersion service
�� Large areas with surface temperatures higher than 85° F, see additional comment #4 in product data sheets.

Color: Black

Size: 1 Gallon

Mix ratio is 2:1

This product must be activated with FG-040 Activator.

To review the product data sheet for this product, click here