Corlar® LV SG™ is a high-build, very high solids, two component, VOC conforming (0.71 lbs/gal) semi-gloss epoxy
based on DuPont amido amine cured epoxy technology. The resulting highly durable coating delivers outstanding
corrosion and chemical resistance.

SUGGESTED USES:
As a high performance coating, intermediate coat, direct-to-metal coating or topcoat on carbon steel, galvanized steel, stainless steel, aluminum, concrete, concrete block and wood where::

• A very low VOC, high-solids coating is required, but plural component spray equipment is not available or
impractical to use.
• Single coat applications up to 12 mils dry film thickness are required.
• Rusted, hand or power-tool cleaned surfaces must be protected.
• Excellent resistance to chemical and/or marine environments is required.
• Outstanding abrasion resistance and edge protection are required.
• Application by brush and roller, in addition to spraying, may be necessary.
• Smooth appearance is desirable.

NOT RECOMMENDED FOR:
• Immersion service
• Exterior exposure without topcoat
 

Color: White

Size: 1 Gallon 

Mix Ratio is 2:1

This product must be activated with FG-090 Activator.

To review the product data sheet for this product, click here