Corlar® 2.8 HG™ is a high build, high solids, two-component, VOC conforming (2.8 lbs./gal.), high gloss epoxy based
on DuPont modified polyamide epoxy technology. The resulting highly durable coating delivers outstanding corrosion
and chemical resistance.

SUGGESTED USES:
As a high performance coating or topcoat on properly prepared carbon steel, galvanized steel, stainless steel,
aluminum, concrete, concrete block and wood where:

• Smooth appearance with high gloss and custom color capability is desired.
• Excellent resistance to chemical and/or marine environments is required.
• Application by brush and roller, in addition to spraying, may be necessary.
• Application may be required down to 40°F.

NOT RECEOMMENDED FOR:
• Immersion service
• Exterior exposure without topcoat

Color Card: 1633

Color: Shale Gray 

Size: 1 Gallon 

Mix Ratio is 1:1

This product must be activated with VG-026 Activator.

To review the product data sheet for this product, click here

The price listed below is for a gallon of product, if you would like to purchase the needed activator for this product select it from the drop down menu below and the appropriate amount of activator will be included for your purchase and the price will be adjusted to reflect the additional activator. Your will be purchasing the gallon amounts + the needed activaor amounts (mixing ratio of 1:1 would be 1 gallon of product + 1 gallon of activator = 2 gallons total).