Corlar® 2.8 HG-D™ is a high solids, two-component, VOC conforming (2.8 lbs./gal.), direct to metal, high gloss epoxy based on DuPont modified polyamide epoxy technology. The resulting highly durable coating delivers outstanding corrosion and chemical resistance.

SUGGESTED USES:
As a high performance coating or topcoat on properly prepared carbon steel, galvanized steel, stainless steel,
aluminum, concrete, concrete block and wood where:

• Smooth appearance with high gloss and custom color capability is desired.
• Single coat application up to 5 mils dry film thickness is required.
• Excellent resistance to chemical and/or marine environments is required.
• Application by brush and roller, in addition to spraying, may be necessary.
• Rusted, hand or power-tool cleaned metal surfaces must be protected.
• Application may be required down to 40°F.

NOT RECEOMMENDED FOR:
• Immersion service
• Exterior exposure without topcoat

Color Card: 1640

Color: Black 

Size: 1 Gallon 

Mix Ratio is 1:1

This product must be activated with VF-026 Activator.

To review the product data sheet for this product, click here

The price listed below is for a gallon of product, if you would like to purchase the needed activator for this product select it from the drop down menu below and the appropriate amount of activator will be included for your purchase and the price will be adjusted to reflect the additional activator. Your will be purchasing the gallon amounts + the needed activator amounts (mixing ratio of 1:1 would be 1 gallon of product + 1 gallon of activator = 2 gallons total).