Corlar® 2.1-PR™ is a high build epoxy mastic, two-package, VOC conforming product (2.1 lbs/gal)* based on DuPont amido amine modified polyamide epoxy technology. The resulting highly durable coating delivers outstanding corrosion and chemical resistance. *See Additional Comment #10 on product data sheet.

SUGGESTED USES:
As a high performance primer or intermediate coat on carbon steel, galvanized steel, stainless steel, aluminum,
concrete, concrete block and wood where:

�� Rusted, hand or power-tool cleaned surfaces must be protected.
�� Single coat applications up to 10 mils dry film thickness are required.
�� Application will be made over damp surfaces and/or under conditions of high relative humidity
�� Excellent resistance to chemical and/or marine environments is required.
�� Outstanding abrasion resistance and edge protection are required.
�� Application by brush and roller, in addition to spraying, may be necessary.
�� Application must be made at temperatures as low as 35°F.
�� No induction time and long pot life will improve productivity.

Corlar® 2.1-PR™ may also be used as a high performance tank lining primer under Corlar® 2.1-ST™ on carbon steel or concrete for immersion service in near neutral pH water, fresh water, or saltwater. Corlar® 2.1-PR™ is not
recommended for use with potable water. Contact your DuPont Performance Coatings Representative for specific
immersion service recommendations and procedures.

RECOMMENDATIONS FOR IMMERSION SERVICE:
Corlar® 2.1-PR™ when applied in multiple coats (at least 2) at 10-12 mil DFT is recommended for immersion service in near neutral, fresh or saltwater exposures. It is not recommended for use with potable water. It may be used for fire water towers, ballast tanks, clarifiers, wastewater treatment plants, offshore structures, pier pilings and supports and other areas where a high level of water resistance is required. See Additional Comment #5 on product data sheet.

Color: Red Oxide 

Size: 1 Gallon

Mix ratio is 1:1

This product must be activated with VF-525 Activator.

To review the product data sheet for this product, click here

The price listed below is for a gallon of product, if you would like to purchase the needed activator for this product select it from the drop down menu below and the appropriate amount of activator will be included for your purchase and the price will be adjusted to reflect the additional activator. Your will be purchasing the gallon amounts + the needed activaor amounts (mixing ratio of 1:1 would be 1 gallon of product + 1 gallon of activator = 2 gallons total).