Corlar® LV PR™ is a high-build, very high solids, two component, VOC conforming (0.7 lbs/gal) epoxy primer based
on DuPont amido amine cured epoxy technology. The resulting highly durable coating delivers outstanding corrosion
and chemical resistance..

SUGGESTED USES:
As a high performance primer or intermediate coat over properly prepared carbon steel, galvanized steel, stainless
steel, aluminum, concrete, concrete block and wood where:

• A very low VOC, high-solids coating is required, but plural component spray equipment is not available or
impractical to use.
• Rusted, hand or power-tool cleaned surfaces must be protected.
• Excellent resistance to chemical and/or marine environments is required.
• Outstanding abrasion resistance and edge protection are required.
• Application by brush and roller, in addition to spraying, may be necessary.
• Smooth appearance and high gloss are desirable.

NOT RECOMMENDED FOR:
• Immersion service
• Exterior exposure without topcoat
 

Color: Red Oxide

Size: 3 Gallon Kit (2 gallons of product + 1 gallon of activator) 

Mix Ratio is 2:1

To review the product data sheet for this product, click here